UGF6KV 3*50+1*16高压橡套软电缆价格 盾构机用矿用橡套电缆 (UGF):盾构机用电缆,用于交流额定电压6kv及以下移动配电装置及矿山采掘机械;起重运输机械等 (UGEFP):盾构机用电缆,露天矿用高压橡套软电缆 (UGEFHP):盾构机用耐寒电缆,露天矿用高压耐寒橡套软电缆 (盾构机电缆):掘进设备用采掘机电缆。产品适用于额定电压8.7/15kV及以下露天矿及地下掘进重型设备用高压橡套软电缆。 UGF6KV 3*50+1*16高压橡套软电缆价格 使用特性 Operating characteristics · 工频额定电压U0/U为3.6/6kv~26/35kv。 Rated power-frepuency voltage U0/U: 3.6/6kv~26/35kv. · 电缆导体的zui高允许工作温度:90℃。 Max.admissible operating temperature of the conductor:90℃. · 短路时(zui长时间不超过5s)电缆导体的zui高温度不超过2500C。 Max. short-circurt temperature of conductor shall not exceed 2500C. (5s maximum duration) · 电缆敷设时环境温度应不低于00C。 The ambient temperature under installation should not below 00C. · 电缆弯曲半径:三芯电缆不小于电缆外径15倍;单芯电缆不小于电缆外径20倍。 The bending radius of a single-core cable should not less than 20 times of the cable diameter. The bending radius of a single-core cable should not less than 15 times of the cable diameter. YJV电缆 YJV3.6/6KV 3*50高压电力电缆电缆额定电压的选择 Voltage designation · 电缆的额定电压应适合于电缆系统的运行状况,用U0/U(Um)kv表示。 U0-电缆设计用的导体对地或金属屏蔽之间的额定工频电压; U-电缆设计用的导体间的额定工频电压; Um-设备可承受的“zui高系统电压"的zui大值。 · 三相系统用电缆的U0值推荐如下表: The values of U0 recommened for cable to be used in three-phase systems are listed below:
| U kv | U m kv | U 0 * kv | A 和 B 类系统 System categories A and B | C 类系统 Systems categories C |
| 6 | 7.2 | 3.6 | 6 |
| 10 | 12 | 6 | 8.7 |
| 15 | 17.5 | 8.7 | 12 |
| 20 | 24 | 12 | 18 |
| 30 | 36 | 18 | - |
| 35 | 40.5 | 21 | 26 |
|
YJV电缆 YJV3.6/6KV 3*50高压电力电缆 | A类系统──该类系统任何一相导体与地和接地导体接触时,能在1min内与系统分离 B类系统──该类系统仅包括单相接地故障短时运行的条件,接地故障时间应不超过1h, 但在任何情况下,zui长不超过8h每年接地故障总持续时间不超过125h; C类系统──不属于A类、B类的系统。 |
|